Medical eye protection goggle

Keep the product in its original package. Do not put any weight above it. Keep it in a dry, fresh and ventilated area, sheltered from sunlight and away from chemicals and abrasive substances.

To clean rinse with water at room temperature (20°C ± 5°C) with a mild detergent. Do not use hot water or dis solvent. Dry with a soft cloth. Never use abrasive cloth
and do not dry close to a heat source. If requires, a small amount of disinfectant in line with manufacturers’ instruction can be added to the cleaning solution.

There is no expiration date for this product. Service life is basically depending on the care supplied and conditions of use. Under normal circumstances the eye
protector should be replaced at least every 6 months. However any damaged equipment must be replaced.

Goggles glasses with full transparency for working with liquid and chemical spraying, vapor and mist coating and exterior scratch-resistant lenses.
The glasses are designed to protect against hot and chemical fluid explosions. Can be mounted over sight glasses. Suitable for lab workers and chemical facilities. The glasses with a dedicated acetate lenses for chemical, preventing the replacement of the glasses with any exposure.
Mechanical resistance F which provides high resistance to any mechanical damage. UV protection at excellent than the standard. Coating that prevents dirt from
accumulating on the lenses.
Holders of EN166, ANSI Z87.1 & FDA vision protection.

150 pairs, outer box420*410*555mm8.3kg
150 pairs, outer box420*410*555mm8.3kg